CoverClean HC – Concrete Multi-Surface Oil Cleaner

CoverClean HC is a highly effective professional grade cleaning solution that uses micro–organisms for deep cleaning oil  from concrete, masonry and existing coating surfaces.

CoverClean HC  is a professional grade, microbial cleaner, develop for cleaning oil from concrete. The product contains micro–organisms for digesting and deep cleaning oil, and petroleum based fluids from concrete and other hard surfaces such as wood, block, metal and asphalt.  CoverClean HC has be especially developed for cleaning oil from concrete surfaces prior to top coating or sealing, to reduce slip and fall on oily slabs and to quickly eliminate oil fume smells from basements, cabins and engine rooms.   The product is environmentally safe,  leaves no oil residue and outperforms typical chemical based degreasers.


  • Deep Cleaning Oil From Concrete
  • Works on Concrete and Asphalt
  • Quickly Eliminates Oil Smells
  • Greatly Reduces Slip and Fall on Wet Oily Slabs
  • Cleans all Petroleum based Hydrocarbons
  • Leaves no Residue
  • Fast Acting
  • Meets USDA requirements
  • Non hazardous
  • Biodegradable

For use on:

  • Machine Shop Floors
  • Oil Contaminated Concrete
  • Heating Oil Spill on Basement slabs
  • Drive Throughs
  • Asphalt Paving
  • Warehouse Floors
  • Over Existing Coatings
  • Parking Decks
  • Tanks and Sump pits

Available in 3 different container sizes:

  • 1 Quart (covers 50 sq.ft)
  • 1 Gallon ( covers 200 sq.ft)
  • 5 Gallon ( covers 1000 sq.ft)


Call CoverTec at (888) 579-3725 or email us and learn more about CoverClean HC.



Microbial Cleaning Process


Cleaning oil from concrete and other porous surfaces using microbes is achieved by three major components within the product. The first is an emulsifier which breaks down the surface soils  and the hydrocarbon down to molecular size. This is done in order to achieve the maximum surface area of the hydrocarbon to allow the microbes the greatest area of activity. In breaking down the dirt, oils and greases, the cleaning process begins. The second component of the liquid is a biocatalyst which provides extra oxygen for enhanced biological action and faster results. The third component is a select blend, natural, oil consuming microbes also added during manufacture. These microbes penetrate deep into the pores of the surface to be cleaned to remove embedded oils which conventional cleaning solutions typically leave behind.

More About Microbes

Microbes are single celled bacteria. Even though they are simple organisms, they have devised a system to locate food and to distinguish one item from another. Different microbes have different foods of choice. The strains we have selected for our products have been chosen for their affinity to the various forms of hydrocarbons we want to clean and remediate. They are cultured microbes which are gathered from around the world. They are not genetically engineered. The microbes have been observed to live for several years in this state.

Applied by spraying or pouring, clean up is by water  rinsing to drain or by wet vac.  CoverClean HC is USDA compliant for use in food preparation areas.