Chem Cast 100% Solids Clear Casting Epoxy
Shipping : FREE on all orders above $20 in the continental US
Frequently Purchased Together
GlazeGuard Ceramic & Porcelain Tile Sealer Satin Finish$14.00 – $638.30
CHEM CAST 100% Solids Crystal Clear Epoxy for Casting Applications
Chem Cast is a two-component epoxy casting coating system that is VOC-free, 100% solids and odor-free.
This product can be poured at thickness levels up to 1 ¾ inch (or a maximum 2 inches in a single coat for large application areas) while keeping a crystal-clear look. It displays excellent air release and color retention capabilities. It also possesses superior mechanical properties such as impact resistance without blushing, fisheying and drying to an extremely hard finish that is totally clear.
- UV Resistant
- Crystal clear
- Levels up to 2 inches
- Excellent air release (non-fisheye)
- High color retention
- High impact and wear resistance
- Solvent-free and low odor
- Easy application
- Long working time (pot life)
- Resistant to a wide range of chemicals
- Casting applications
- River Tables
- Natural stone
1.6 sq.ft per gal at 1-inch thickness.
Curing times can differ significantly depending on the thickness, volume poured at once and the shape sought and ambient temperature. It is recommended to apply the product when the room temperature is stable (average 70 deg F)
If applied at low temperatures, the product might not cure properly. The high ambient temperature might create an exothermic reaction.
We do not recommend exceeding a thickness of 2 inches if the application area is large. Fort thicker applications use Epoxy Cast THICK.
1 gal and 3-gallon Kits
12 months when stored unopened below 77°F (25°C) under shade in a dry environment
Priming / Sealing
If porous, the surface needs to be sealed by brushing or rolling the Chem Cast or Chem 100 Natural product
in a thin layer. Sealing the substrate is critical since the surface’s pores could create bubbles. Once sealed, the Chem Cast product can be poured on the surface.
Apply only when air and substrate temperature is close to 70 deg F. Once the seal coat is tacky you can start the pouring process.
Make sure the working area is dust-free. Make sure to prepare a screen to protect the surface once your work is completed since dust, particle and other objects could fall in the epoxy prior to complete cure. This would have a negative impact on the result. The product can also be gently heated to prevent the entrapment of bubbles.
Gloss Crystal Clear Epoxy