Penetrating Oil and Stain Resistant Sealer for Stone, Tile and Concrete.
Application Method: Pump-up Spray, Roller, Brush
Coverage: Porous surface: 200-250 sq.ft/gal Dense Surface: 1500-2000 sq.ft/gal
Dry Time: 45 mins
Dry time: Light Traffic 3 hrs Heavy traffic 24 hrs
Surface: Concrete, Stucco, Pavers, Marble, Terrazzo, Brick, Saltillo, Travertine, Slate,
Finish: Natural, no change in apperance
Base: Water Base, Zero odor
FREE SHIPPING! FOR ALL ORDERS IN THE CONTINENTAL USA
Are you a contractor? Contact us for a special offer
$27.85 – $318.00
- Additional information
Oil and stain resistant, penetrating, clear fluoropolymer, sealer
Excellent Oil Repellency
Resistant to Driving Rain
No Effect on Appearance
Non Yellowing UV Resistant
Reduced Dirt Pick Up and Smog
Does Not Etch Glass
Easy to Apply
Interior or Exterior
Concrete Susceptible to Staining or Discoloration
Marble and Terrazzo
Natural Stone and Slate
Unglazed Tile and Grout
Parking Decks and Loading Docks
Driveways and Garage Floors
Patios and BBQ areas
Walkways and Balconies
18 months when stored at 77°F (25°C) or less in a dry and shaded area.
CoverSeal PEN55 is easily applied using a roller, mop, brush or low-pressure pump up spray equipment with a fan type spray nozzle.
Coverage will vary depending on surface porosity. Polished and dense surfaces usually require 1 coat. Concrete, grout and other porous surfaces usually require 2 coats.
Porous surfaces: 250 to 300 ft²/gallon per coat.
Dense surfaces: 1,500 to 2,000 ft²/gallon per coat.
DOWNLOAD: Technical Data Sheet Safety Data Sheet
1 Gallon, 1 Quart, 5 Gallon
|Coatings & Sealers||
CONCRETE, NATURAL STONE, PAVERS