CoverShield E900 Wear Resistant Epoxy Color Coat
Shipping : FREE on all orders above $20 in the continental US
Frequently Purchased Together
GlazeGuard Ceramic & Porcelain Tile Sealer Satin Finish$14.00 – $638.30
CoverShield E900 Wear Resistant Clear Epoxy Concrete Sealer & Floor Coating – Exclusively for Contractors
- High abrasion resistance
- Excellent light reflectivity
- Zero VOC
- Resistant to wide range of chemicals
- Available in wide range of colors
- Easy to clean and maintain
- Airplane hangers
- Garage Floors
- Food preparation areas
- Pharmaceutical plants
- Food and beverage facilities
Apply at a rate of between 60-130ft²/gal using notched squeegee and immediately back roll with a 3/8” nap roller. If desired recoat after 8 to 24 hours at 77oF. Clean equipment using solvent.
Standard: light grey, dark grey, beige, tile red, lite blue, brown, tan, green and off-white.
Other colors available on request subject to minimum
Slip Resistant Finish
A slip resistant finish can be achieved by broadcasting dry sand onto the surface of the first coat while still wet.
When the first coat has dried a second coat should then be applied at a rate of 130ft² per gallon. The grain size (Fine or Coarse) and broadcast rate will depend on the surface texture required but will generally be in the range of 10 to 20lbs/100ft2 (0.5 to 1kg/m2