skip to Main Content

Endurable Concrete Armor

$14.00$304.00

Shipping: FREE on all orders in the continental US
Delivery: Typically 2 to 3 business days
Clear

Location

Interior/Exterior

Task

Base Coat/ Primer

Application

T-bar applicator or Magic Trowel

Surface

Concrete Wood Metal

Base

Water Based Epoxy

Drytime

3- 6 hours

Coverage

200-600 sq.ft/gal

Finish

Clear

Endurable Concrete Armor Is A Professional Grade Epoxy Product.

Endurable Concrete Armor is cutting edge epoxy technology that is engineered to bond to power troweled concrete at an unimaginable bond strength of over 1000 psi. The use of polymeric chips, quartz and sand, or the Endurable Concrete Stain create durable and decorative surfaces. It is also very easy to apply, incredibly versatile, and amazingly hard. Additionally, impressive dry times are achieved to produce a great return-to-service application. Endurable Concrete Sealer may be applied in recoat window to help provide superior chemical resistance.

Product Information

  • Easy application — apply with t-bar or magic trowel, thick or thin.
  • Unbelievable bond strength over 1000 psi (4 to 5 times stronger than most coatings).
  • Works great as clear coat, material in which to broadcast, or add color.
  • Pendulum hardness of over 320 (standard coatings are usually 30 – 120).
  • Fast return to service – incredible dry speed for low VOC product.
  • Works great as primer or topcoat – even 15-20 mils will cure properly.

Frequently Asked Questions

How to repair or recoat GlazeGuard?

GlazeGuard is a tough clear sealer and very hard wearing. It tends to keep its shine for a long time but it can still be scratched. Especially if you drag sharp objects, like heavy kitchen appliances or point loads like table legs or chair legs.

To spot repair or recoat entire area it is not necessary to strip the sealer, you just need to sand or scrub the surface clean so it can be top coated. Sand with 120 grit sand paper or scrub with black pad and GlossGlean neutral cleaner. Clean off the dust or residue and apply a top coat. For more detailed instructions see GlazeGuard Maintenance instructions

Cleaning GlazeGuard?

GlazeGuard when fully cured has a hard surface so dirt does not easily stick to it. You don’t need to use aggressive cleaners. An part of maintaining your floor is to use dust mop or “swiffer” type microfiber mop to keep sand and dirt off the floor. After that to wash the floor you can use neutral clean or mild liquid detergents, light vinegar solutions, or light ammonia solutions.

Stay away from solvents like Paint strippers, Acetone and Xylene. If you do have use concentrated cleaners/degreasers. Clean up residue right away. In general make sure all standard floor cleaners are diluted in accordance with manufactures instructions. For more information see GlazeGuard Maintenance instructions.

CoverSeal PEN 55 Photos

CoverSeal PEN 55 Videos

Back To Top