skip to Main Content

Endurable Concrete F1 Sealer

$14.00$87.00

Shipping: FREE on all orders in the continental US
Delivery: Typically 2 to 3 business days
Clear

Location

Interior/Exterior

Task

Floor/Deck

Application

Roller, Low pressure pump spray

Surface

Concrete Wood Brick

Base

Water Based Acrylic

Drytime

30-45 Min.

Coverage

400-800 sq.ft/gal

Finish

Clear

Endurable F1 Water-Based, Oil And Stain-Resistant Penetrating Concrete Paver Sealer

This single component sealer is an excellent replacement for solvent-based sealers. The product is fast-drying and low contains low VOC content. The longevity is twice that of typical acrylic sealers.

Product Information

  • Matte or gloss finish
  • Quick to dry
  • Spray, roll, or micro-fiber application
  • Safe for countertops
  • Low VOC content and low odor
  • Good chemical resistance
  • Good durability
  • Very easy to apply
  • Good UV stability
  • Good against hot tire pick-up.
  • Excellent product to use in conjunction with ENDURABLE CONCRETE SEALER. Application of product during re-coat window over ENDURABLE CONCRETE SEALER results in rich look usually achieved with floor wax, yet yielding much longer term results
  • Good elasticity
  • Excellent coverage rates
  • Excellent replacement for solvent-based acrylic sealers.

Frequently Asked Questions

How to repair or recoat GlazeGuard?

GlazeGuard is a tough clear sealer and very hard wearing. It tends to keep its shine for a long time but it can still be scratched. Especially if you drag sharp objects, like heavy kitchen appliances or point loads like table legs or chair legs.

To spot repair or recoat entire area it is not necessary to strip the sealer, you just need to sand or scrub the surface clean so it can be top coated. Sand with 120 grit sand paper or scrub with black pad and GlossGlean neutral cleaner. Clean off the dust or residue and apply a top coat. For more detailed instructions see GlazeGuard Maintenance instructions

Cleaning GlazeGuard?

GlazeGuard when fully cured has a hard surface so dirt does not easily stick to it. You don’t need to use aggressive cleaners. An part of maintaining your floor is to use dust mop or “swiffer” type microfiber mop to keep sand and dirt off the floor. After that to wash the floor you can use neutral clean or mild liquid detergents, light vinegar solutions, or light ammonia solutions.

Stay away from solvents like Paint strippers, Acetone and Xylene. If you do have use concentrated cleaners/degreasers. Clean up residue right away. In general make sure all standard floor cleaners are diluted in accordance with manufactures instructions. For more information see GlazeGuard Maintenance instructions.

CoverSeal PEN 55 Photos

CoverSeal PEN 55 Videos

Back To Top