skip to Main Content

GlazeGuard Sample Kit

Change Selection

Shipping : FREE on all orders above $20 in the continental US

Location : Interior/Exterior
Task : Floor/Wall
Application : Roller/Brush
Surface : Ceramic, Porcelain, Concrete, Wood
Base : Water Based
Drytime : 12 hrs Gloss/Satin 8 hrs Matte
Coverage : approx 2 to 4 sq.ft
Finish : Clear Gloss Satin or Matte

Sample Kit

Each 4 fl.oz Sample kit (gloss or satin) will cover between 3 to 4 sq.ft.

Each 3 fl.oz Sample kit (matte) will cover between 2 to 3 sq.ft.

Frequently Asked Questions

How to repair or recoat GlazeGuard?

GlazeGuard is a tough clear sealer and very hard wearing. It tends to keep its shine for a long time but it can still be scratched. Especially if you drag sharp objects, like heavy kitchen appliances or point loads like table legs or chair legs.

To spot repair or recoat entire area it is not necessary to strip the sealer, you just need to sand or scrub the surface clean so it can be top coated. Sand with 120 grit sand paper or scrub with black pad and GlossGlean neutral cleaner. Clean off the dust or residue and apply a top coat. For more detailed instructions see GlazeGuard Maintenance instructions

Cleaning GlazeGuard?

GlazeGuard when fully cured has a hard surface so dirt does not easily stick to it. You don’t need to use aggressive cleaners. An part of maintaining your floor is to use dust mop or “swiffer” type microfiber mop to keep sand and dirt off the floor. After that to wash the floor you can use neutral clean or mild liquid detergents, light vinegar solutions, or light ammonia solutions.

Stay away from solvents like Paint strippers, Acetone and Xylene. If you do have use concentrated cleaners/degreasers. Clean up residue right away. In general make sure all standard floor cleaners are diluted in accordance with manufactures instructions. For more information see GlazeGuard Maintenance instructions.

Sample Kit Photos

Sample Kit Videos

Back To Top