PreTreat Mild Acid Cleaner for Tiles and Concrete
$24.85 – $51.50
FREE SHIPPING! FOR ALL ORDERS IN CONTINENTAL USA
Are you a contractor? Contact us for a special offer
- Additional information
PreTreat Mild Acidic Tile Cleaner For Ceramic, Concrete, Stone & Other Surfaces
The industry’s leading acid cleaner and etching treatment for high and low traffic surfaces.
|Ceramic and Porcelain tiles|
|Shower walls and floors|
|Locker rooms and floors|
|Hard water stains|
|Scum on ceramic tiles|
|Easy to use|
|Rinses freely and easily with water|
24 months in unopened container. Do not allow to freeze.
1 Gallon of PreTreat will cover approximately 800 to – 1,000 sq. ft. depending upon porosity of surface.
PreTreat contains a blend of mild acids. Use rubber gloves and safety goggles. When using a pressure sprayer for application, avoid breathing the mist or getting the spray on yourself.
PreTreat is Ready to Use. Clean the surface thoroughly to remove all dirt, grease and debris. Always test product in an inconspicuous area before applying. Apply using an applicator, mop or low pressure sprayer. Caution use a spray devise that will not create heavy misting or over spray.
The floor should be kept wet with the treatment, usually for 15 to 20 minutes, and then rinsed away with clean, cold water. Scrubbing with a stiff wire brush may be necessary to remove heavy deposits of efflorescence or cement scale. Rinse thoroughly to remove residue squeegee off all excess of water. If no drains are available, use a wet-vac to remove PreTreat, then mop with fresh water.
Allow the floor to dry before applying any subsequent floors sealer.
1 Gallon, 1 Quart
|Cleaners and Accessories||
CERAMIC, CONCRETE, PORCELAIN
Cleaning Tile and Stone
BRICK & MORTAR, CERAMIC, CONCRETE, PAVERS, PORCELAIN, SALTILLO/ TERRA COTTA