SurfaceClean is an industrial strength, water soluble, alkaline degreaser, which incorporates, advanced concepts in chemical soil removal.
It will effectively remove a wide variety of soils common to industrial, institutional and commercial facilities including accumulations of grease, oil, dirt, soot, smoke, food, mold and mildew SurfaceClean handles grease and grime with quick ease while assuring the removal of build-up not cleaned by normal cleaning procedures.
At full strength SurfaceClean will strip paint on most surfaces and allow for easy removal. Diluted to proper ratios, SurfaceClean is safe on most surfaces.
FREE SHIPPING! FOR ALL ORDERS IN THE CONTINENTAL USA
Are you a contractor? Contact us for a special offer
$37.75 – $127.00
- Additional information
Powerful Degreaser and Substrate Cleaner
High strength formula
Easy to use
Rinses freely and easily with water
Does not harm finishes
Hard surfaces before top coating
Concrete Floors and Slabs
All Roof type substrates
Brick and Block Pavers
Tile and Stone
Dilute 1 part SurfaceClean with 3 part water. Apply by spray or brush to area at approximately 200ft² per gallon (4.9m² per liter). Allow 10 to 15 minutes for penetration. Rinse off with clean water using a 1200psi pressure washer. For unusually deep seated grease and oil stains, a second application may be necessary.
Apply full strength cleaner to very old surfaces. To clean roofer’s tools, allow to soak in pail of 1:1 solution of SurfaceClean overnight
Coverage is dependent upon relative cleanliness of the substrate and the porosity. Approximately 200ft2 per diluted gallon.
1 Gallon, 5 Gallon
|Cleaners and Accessories||
CONCRETE, PAVERS, ROOF TILES