- Additional information
Deep Cleaner and Gloss Protector for Floors
- Cleans and restores in one step
- Penetrates and removes embedded dirt
- Cleans up to 4 coats deep
- Eliminates stripping
- Eliminates spray buff and restores
- Works with all speed floor machines
- Creates a protective shield against dirt
- Extends life of gloss floors
- Adds toughness and anti slip surface
- Green formulation
- Deep cleaner/protector
- Maintain finished waxes and sealers
- All composition, resilient and non-resilient flooring
12 months when stored at 77°F (25°C) or less in a dry and shaded area.
Sweep floor to remove loose dirt.
For deep scrubbing and cleaning without stripping
Dilute 8fl.oz per 1 gallon of water. Use a black strip pad under a low speed machine or automatic scrubber to deeply cleanse the finish (will not strip finish). Cleans up to 4 layers deep. Scrub floor and pick up the solution in one pass or damp-mop thoroughly. Let it dry.
For day to day cleaning: Use in mop bucket or auto scrubber. Dilute 2.0 Fl.oz per 1 gal cold water and use any time floors are moped or scrubbed.
For high speed burnish. Use SurfaceTreat undiluted in a quart spray bottle. Adjust trigger sprayer to a stream. Spray in front of the machine as you walk slowly forward in a straight line. 1 spray every 10 steps.
To repair high stress areas: Such as in front of elevators, entrance ways and between check -out counters. Use SurfaceTreat undiluted in a quart spray bottle with a high speed burnisher and pad. Adjust trigger sprayer to a stream. Spray in front of the machine as you walk slowly forward in a straight line. 2 sprays every 2 steps. Walk machine backwards over the same area to close the surface.
Do not mist spray Surface Treat. Adjust trigger to stream spray
Do not apply below 40°F (5°C)
Do not use on surfaces that can be harmed by water
1 Gallon, 1 Quart
|Cleaners and Accessories||