VinylGuard Satin WB Polyurethane Vinyl Plank Floor Sealer Coating.

We classify VinylGuard as a semi-permanent finish. . Meaning it can be stripped if you want to, but you don’t have  to strip.  To re coat say after 2 years you simply sand the surface with 200 grit sand screen, wipe clean with a damp cloth and the reapply another coat.

YesVinylGuard is a very tough UV (non yellowing) resistant two part polyurethane designed to replace wax floor finish.The product has excellent resistance to heavy foot traffic and staining.

YesVinylGuard is a very tough UV (non yellowing) resistant two part polyurethane designed to replace wax floor finish.The product has excellent resistance to heavy foot traffic and staining.

Yes but you have to lightly sand the surface and then wipe clean.

VinylGuard is very chemical resistant.  It will resist harsh cleaning chemicals including the ones you mentioned above (See also chemical resistant chart attached).  We test up to 24 hours.  It is good practice to clean up chemicals as soon as possible within 4 hours.

Note: Iodine and hair dye will stain VinylGuard and Gasoline will soften the surface until the gas evaporates.  Then the surface will harden again.

You need to use a Chemical Stripper like our CT-30. This stripper is stronger (thicker) than typical floor wax stripper.  See seperate data sheet for CT-30. You can also buy similar from local DIY store.  These products will not damage the VCT.

Yes we sell SurfaceTreat and also GlossClean (see separate data sheets)

Currently we have no  National Distribution .  We ship direct to our customers.  VinylGuard is very Green and non-hazard so ships easily by UPS.