CoverSeal AC250 Matte WB Acrylic Sealer, Low sheen
$27.50 – $203.50
Water Based High performance acrylic clear sealer with zero odor formula.
When applied to porous tile, stone and concrete the product will produce a hard wearing clear surface that provides protection against spills and stains and exceptional water resistance. Matte Finish.
Application Method: Pump-up Spray, Roller, Brush
Coverage: 300-500 sq.ft/gal/coat
Dry Time: 45 mins
Dry time Light Traffic: 3 hrs
Surface: Saltillo, Travertine, Slate,Concrete, Stucco,Pavers, Stone, Brick, Wood.
FREE SHIPPING! FOR ALL ORDERS IN THE CONTINENTAL USA
Are you a contractor? Contact us for a special offer
- Description
- Additional information
- Datasheets
Description
CoverSeal AC250 Matte Finish, Odorless Acrylic Paver Sealer
A Water Based Natural Look Sealer for Stone, Tile and Concrete
This acrylic floor sealer is available in Gloss finish as well.
Features:
– Natural look non yellowing sealer
– Highly water repellant
– Beautifies and protects faded tile
– Repels oil and stains
– V.O.C. compliant
– Abrasion resistant
– Zero odor
– Makes surface easier to clean
– Hot tire pick up resistant
Typical Surface Uses:
– Saltillo
– Mexican tile
– Porous tiles
– Slate
– Travertine
– Concrete floors
– Colored and stamp concrete
– Natural stone
Environment:
– Interior or exterior use.
Shelf Life:
– 12 months when stored at 77°F (25°C) or less in a dry and shaded area. Protect from freezing.
Theoretical Coverage:
– Porous surface 300-350 ft²/gal (7.3-8.5 m²/l)
– Dense surface 400-600 ft²/gal (9.8-14.7 m²/l)
– A two coat application is recommended for porous substrates.
Read the CoverSeal AC250 Technical Data Sheet
Additional information
| Size | 1 Gallon, 1 Quart, 5 Gallon |
|---|---|
| Coatings & Sealers | STUCCO, CONCRETE, NATURAL STONE |
| Task | Clear Coating, Concrete Protection |
| Substrate | BRICK & MORTAR, CONCRETE, MARBLE, NATURAL STONE, PAVERS, SALTILLO/ TERRA COTTA, TERRAZZO |
| Location | Interior, Exterior |
