Skip to content

CoverShield E400 WB Low odor, water-based, epoxy coating


Change Selection

FREE Shipping on all orders above $20 in the continental US

Location : Interior
Task : Floors
Application : 3/8th microfiber roller
Surface : Concrete, Vinyl, Wood
Base : water
Drytime : 30 min
Coverage : 220-320 sq. feet per gallon
Finish : Various Colors

CoverShield E400 WB Low Odor Water Based Epoxy Coating

CoverShield 400 WB is a two-component, abrasion-resistant low odor, water based epoxy coating for use
with concrete, wood, vinyl and masonry.


  • Low Odor
  • Water Based
  • Wear resistant
  • Resistant to wide range of chemicals
  • Available in wide range of colors
  • Easy to clean and maintain

Main Uses

  • Showrooms
  • Locker rooms
  • Garage floors
  • Food preparation areas
  • Pharmaceutical plants
  • Warehouses
  • Food and beverage facilities
  • Day Care facilities


Apply at a rate of between 230 to 320ft² per gallon at 5-7 mils wet thickness using a 3/8” nap roller. If desired recoat after 8 to 24 hours at 77oF. Clean equipment using a solvent.  Actual coverage will depend upon the surface profile, the porosity of concrete.


Standard: light grey, dark grey, beige, tile red, lite blue, brown, tan, green and off-white.

Other colors available on request subject to minimum

Finish: Gloss

Slip Resistant Finish

A slip-resistant finish can be achieved by broadcasting an anti-slip additive like CoverGrip onto the surface of the first coat while still wet.

When the first coat has dried a second coat should then be applied at a rate of 220- 320 0ft² per gallon.

This product is exclusively for contractors.

Contact us for a special offer

PDF Downloads

Frequently Asked Questions

CoverShield E400 WB Photos

CoverShield E400 WB Videos

Back To Top